Speed Sensor (8 Pulse/Rev) With SY Cable
This heavy duty speed wheel is 200mm in diameter and generates 8 pulses per revolution of the wheel. The unit is supplied complete with 7m of high quality, heavy duty, abrasion resistant SY cable.
- excluding VAT
Sensor Type: Magnetically Biased Hall Effect Integrated Circuit
Pulses Per Rev: 8
Supply Voltage: 4.5 to 24 VDC
Temp. Range: -40 to +150 deg C
Reverse Polarity Protection (ie. No damage if inadvertently wired in reverse)
Protection against pulsed transients to +60V, to -40V.
Pull Up Resistor Fitted (1K ohm) to provide High standard signal and “Low going” pulse when target passes the sensor.